Omega Metals, Inc. was established in 1981 to provide quality precision sheet metal parts for commercial and military clients. The company is located in Northeast Florida, midway between Jacksonville and Gainesville.Well trained personnel, modern equipment and updated computer systems enable Omega to offer consistent, timely, quality production in an economical fashion.
Omega's full graphics CAD-CAM system serves CNC punching equipment, milling machines, laser equipment, etc. The system uses TekSoft software on our in-house computer systems and will accept a DXF file via modem and transmit a DXF file verification.
Omega Metals has installed "Metal Mizer," a complete estimating, labor reporting, job costing, job tracking system. This software is installed on a 25 user network and allows instant job status and insures that our delivery times are met by the real time scheduling portion of the software.
Fabrication capabilities include shearing, CNC punching, bending and milling, mig, heliarc and other welding techniques. Finishing capabilities include aluminum conversion coating, powder coating, spray painting and silkscreening. Diversified capabilities allow Omega to handle prototype, short run and long run production requirements.
Omega's production facilities total 76,000 square feet.
Quality control at Omega is based on Department of defense military standard MIL-1-45208A. Inspection equipment is strictly maintained to assure consistent quality.
Diversified facilities and equipment allow Omega to handle a broad range of customer requirements. Strict attention to quality assures our customers of consistent production with conformity to their specific requirements.
Our latest expansion added 37,000 sq. ft. to the manufacturing facilities.
FACILITIES INCLUDE:
SHEARING
- WYSONG - MILES: 3/16" X 10 FT. squaring shear
- ACCUPRESS: 1/4" X 10 ft. squaring shear
- PEXTO: 16GA X 48" shear
CNC PUNCHING
- (2) STRIPPIT: FC-1250 S X P 50" X 82" table w/trap door
- STRIPPIT: FC-1500 60" X 96" table w/4 indexable stations
- STRIPPIT: 18-30 Manual punch press with pantograph
MATERIALS FORMING
- LVD:Two press brakes 35 ton X 6 ft. equipped with computer controlled back gauge
- WYSONG-MILES:press brake 35 ton X 6 ft. equipped with computer controlled back gauge
- BLISS: punch press-straight side. 110 tons with 24" X 60" bed
- ACCUPRESS:
- CNC servo brake
- 10 ft. X 100 ton
- TRUMPF: 6 ft. x 85 TON CNC servo brake
- TRUMPF: 10 ft. X 185 ton CNC servo brake
- TRUMPF: Two C60 CNC Press brakes 48" X 60 Ton
WELDING
- LINDE: Four 500 AMP AC/DC Heli-Arc welders
- AIRCO: Five 250 AMP mig wire semi-automatic
- SPOTWELDER: 7.5 KVA
- SPOTWELDER: 15 KVA
- SPOTWELDER: 475 KVA Aluminum
FINISHING
- GRINDING MASTER 2000: 36" conveyored continuous belt sander
- BEACH: Panel finisher and polisher
- TIME SAVER: 12" conveyored continuous belt sander
MACHINING
- (2) CNC MILLING MACHINES: 48" X 24" MAZAK VTC-200B
- CNC LATHE: MAZAK QT-200
- HIGH SPEED ALUMINUM EXTRUSION SAW-60
- LOW-SPEED STEEL COLD SAW
MATERIALS PROCESSING
- FAMCO: 18 TON OBI punch press with 6" X 6" notcher
- WHITNEY-ROPER: 6" x 6" hand notcher
- WHITNEY-ROPER: Two model 68, 5 ton kick presses
- HAEGER: Two automatic hardware installation presses
- PEM SERTERS: Two 7-ton pneumatic hardware installation presses
CONVERSION COATING
- IRRIDITE TANKS: 46" X 88" X 40"
PAINTING
- Complete Binks spray painting facility
- Silk screen capabilities for both short run and long run requirements
- Large paint booth in 5,000 square foot space
POWDER COATING
- Conveyorized automatic line handling 38" X 60" X 120" Long
QUALITY CONTROL
- Starrett 18" X 24" granite inspection surface plate
- Mitutoyo 24" height gauge
- Mitutoyo 1" digital micrometer with .0001" space
- Fowler 81 piece gauge block set
MISCELLANEOUS
- Two 5-Ton Overhead Cranes
- Three 6000 Lb. Forklifts
- 28' Ford Cargo Truck
- 20,000 Lb. All Terrain Diesel Fork Lift
OMEGA METALS
PRECISION SHEET METAL FABRICATIONS
6689 SHANDS ROAD
KEYSTONE HEIGHTS, FL 32656
PHONE (352) 473-4984
FAX (352) 473-2147
Please sign our
GUEST BOOK
to receive a FREE brochure and to be
on our mailing list for timely zone cabling
updates, product releases and company info.
Home Page, Product Info, Manufacturing Facility, Authorized Distributors, Manufacturer's Reps, Press Releases, Investor Relations, Guest Book, Site Map, Contact Us
This site was created by Access Ventures, Inc.
To contact the webmaster, please direct e-mail to webmaster@accessventures.com.
©1999 All Rights Reserved.
