Home Page
Product Info
AATK Manufacturing
Authorized Distributors
Manufacturer's Reps
Press Releases
Investor Relations
Guest Book
Site Map

Contact Us 		ZCTC-RF


A0622-RF

A0622-RF

For 6" raised floors (with stringers), this enclosure is 4" deep by 24" square and is designed to house two 48 port patch panels at 45 degree angles on both sides and aimed at the cable pathway in the center of the enclosure. Cable entry is from behind the connecting hardware and the exit is from the face of the hardware into the cable pathway. This helps maintain the cable bending radius. It comes as assembly with all mounting hardware.


This unit comes with:
ZCTC-RF Floor Brackets
Floor Pedestal Brackets 		ZCTC-RF Foam Kit
Fire-Rated Foam Kit



A0822-RF

A0822-RF

Designed for 8" raised floors (with stringers), this enclosure is 6" deep by 24" square and can house up to 192-four pair cables. This offers twice the capacity of our 6" unit. Mounting frames are at 45 degree angles on both sides and aimed at the cable pathway in the center. Cable entry is from behind the connecting hardware and the exit is from the face of the hardware into the cable pathway. It comes as an assembly with all mounting hardware.


This unit comes with:
ZCTC-RF Floor Brackets
Floor Pedestal Brackets 		ZCTC-RF Foam Kit
Fire-Rated Foam Kit



A1222-RF

A1222-RF

Designed for 14" raised floors or better, this enclosure is 12" deep by 24" square and has 21" of racking frame on both sides. The mounting frames are parallel to the floor, giving 50% more capacity than the 0822 model shown above. Cable entry is below the mounting frame and the exit is above the frame. It comes as an assembly with all mounting hardware. This is the ultimate cabinet for information technology equipment room applications.


This unit comes with:
ZCTC-RF Floor Brackets
Floor Pedestal Brackets 		RF Series Foam Kit
Fire-Rated Foam Kit



All enclosures are designed to handle 19" rack mountable connecting hardware. The only restriction is the depth of some equipment. All enclosures are UL listed under UL1863. They are plenum-rated and meet the requirements of NEC 300-B and C, CSA 22.2 #94M91 and CSA 22.2 #4-M89, TIA-EIA, IAEI, NFPA and IEEE.


Please sign our
GUEST BOOK
to receive a FREE brochure and to be
on our mailing list for timely zone cabling
updates, product releases and company info.

Features & Benefits | Product Applications | Cost Savings

A1024-LP | A1024-HR | RF Series | ETHOCOM

Home Page | Product Info | Manufacturing Facilities | Authorized Distributors | Manufacturer's Reps | Press Releases | Investor Relations | Guest Book | Site Map | Contact Us

This site was created by Access Ventures, Inc.
To contact the webmaster, please direct e-mail to webmaster@accessventures.com.
©2000 All Rights Reserved.